Description
Wood grain universal Junior Trims
Universal Trims are used to join areas that are of the same or a similar height. This is the main option that is used when expansion breaks have to be installed on a floor. They consist in most cases of 2 parts: The base and the top. The base is either bonded or nailed to the ground before installation where it is required. The floor is then installed with the necessary clearance on either side of the base to allow for expansion. Once this is completed, the connector slots into the top section, and this then drops into the base. Many variations on this design exist, but they all serve the same purpose. Universal trims can be used as a ramp trim where there is only a small amount of difference between the 2-floor areas it connects.
surface flooring with an equal height with the T-molding. Use as a trim to transition from vinyl plank to tile, laminate or hard surfaces of a different height. The end-molding configuration allows you to transition to carpet or to finish your flooring installation at sliding doors, fireplaces or other fixed edges. For best results, try laying out your moldings in the area where they will be installed before installing flooring planks. That way you can choose the plank that meets the transition to best fit your desired look.
View other trims U-Trims and Reducer-Trim
Wood grain universal Junior Trims
