实木地板翘曲正常吗
刚刚开包的木地板出现翘曲这正常吗？很多人会提出这样的疑惑，本文会详细回答这个问题。
应该非常明确的是，地板翘曲与产品质量高低无关，这与力学有关，地板的长度决定地板的弯曲度。无论是实木板材，细木工板，多层板，夹板，纤维板，密度板，横梁木等等这些用木材制造的产品都会或多或少的出现地板上翘或下弯，百分之50是因为木材自身特性。
实木复合地板，表层为实木，下层或为胶合板或为多层胶合板，由于实木自身力量与胶合板不统一，双方受力不平衡一定会造成上翘或下弯。实木复合地板的长度越短弯曲度会越低，长度越长弯曲度越大。
另外，有一些刚刚拆开包装并未弯曲或弯曲很小，但过几个小时或一两天后出现弯曲，这是因为环境因素所造成的，实木复合地板尽管是由实木与胶合板复合而成，但它的木制特性并没有改变，受到空气潮湿以后，将会加速地板的弯曲，并稳定在某一个翘曲点。
但，地板的上翘弯曲或下翘弯曲是有一定规律的，并不会出现不规则变形。
应该注意的是，无论三层实木，多层实木，欧洲产，中国产，纯实木，地板超过900mm长度以后都会普遍出现弯曲现象。翘曲并不会影响地板的安装，也不会影响地板的使用，弯曲现象会在地板安装结束后消失。
实木地板翘曲正常吗
Is the wood floor warping normal?
Is it normal for the wooden floor that has just been opened to warp? Many people will raise such doubts, this article will answer this question in detail.
It should be very clear that the warpage of the floor has nothing to do with the quality of the product. It is related to the mechanics. The length of the floor determines the curvature of the floor. Whether it is solid wood panels, blockboards, multi-layer boards, plywood, fiberboard, density boards, beams, etc., products made of wood will more or less bend up or down on the floor, 50% of which is because The characteristics of wood itself.
The surface layer of the solid wood composite floor is solid wood, and the lower layer is either plywood or multi-layer plywood. Because the strength of solid wood is not uniform with the plywood, the imbalance of the forces on both sides will definitely cause upturning or down bending. The shorter the length of the parquet, the lower the curvature, and the longer the length, the greater the curvature.
In addition, some have not been bent or slightly bent just after unpacking, but bent after a few hours or one or two days. This is caused by environmental factors. Although the solid wood composite floor is composed of solid wood and plywood, But its wooden characteristics have not changed. After being exposed to air humidity, it will accelerate the bending of the floor and stabilize at a certain warping point.
However, the upward or downward bending of the floor is regular, and there will be no irregular deformation.
It should be noted that whether three-layer solid wood, multi-layer solid wood, European, Chinese, or pure solid wood, the floor exceeds 900mm in length, it will generally bend. Warping will not affect the installation of the floor, nor will it affect the use of the floor. The bending phenomenon will disappear after the installation of the floor.
